thick film resistor networks, dual-in-line small outline molded di p, 01, 03, 05 schematics www.vishay.com for technical questions contact: ff2aresistors@vishay.com document number: 31506 32 revision: 30-sep-05 sogc 01, 03, 05 vishay dale features ? 0.110" [2.79mm] maximum seated height ? rugged, molded case construction ? 0.050" [1.27mm] lead spacing ? reduces total assembly costs ? compatible with automatic surface mounting equipment ? uniform performance characteristics ? meets eia pdp 100, sogn-0003 outline dimensions ? available in tube pack or tape and reel pack *tolerances in bracke ts available upon request. ? 100 milliohm maximum on zero ohm jumper standard electrical specifications global model schematic resistor circuit w @ 70c package power w @ 70c tolerance % resistance range ? operating voltage vdc temperature coefficient ppm/c sogc16 01 0.1 1.6 2 (1, 5*) 10-1m0 50 max 100 03 0.19 1.6 2 (1, 5*) 10-1m0 50 max 100 05 0.1 1.6 2 (5*) 10-1m0 50 max 100 sogc20 01 0.1 2.0 2 (1, 5*) 10-1m0 50 max 100 03 0.19 2.0 2 (1, 5*) 10-1m0 50 max 100 05 0.1 2.0 2 (5*) 10-1m0 50 max 100 global pi n cou n t schematic resista n ce tolera n ce packagi n g special model v alue code sogc 16 05 = d u al terminator 3 digit impedance f = 1% ej = lead free, t ub e blank = standard 20 code, follo w ed b y g = 2% ea = tape & reel (d ash nu m b er) alpha modifier j = 5% dc = tin/lead, t ub e( u p to 3 digits) (see impedance rz = tin/lead, tape & reel from 1-999 as codes ta b le) applica b le global pi n cou n t schematic resista n ce tolera n ce packagi n g special model v alue code sogc 16 01 = b u ssed r = decimal f = 1% ej = lead free, t ub e blank = standard 20 03 = isolated k = tho u sand g = 2% ea = tape & reel (dash nu m b er) 00 = special m = million j = 5% dc = tin/lead, t ub e( u p to 3 digits) 10r0 = 10 ? s = special rz = tin/lead, tape & reel from 1-999 as 680k = 680k ? z = 0 ? j u mper applica b le 1m00 = 1.0m ? global part number information new global part numbering: sogc200310k0gdc (preferred part numbering format) sogc200310k0gdc historical part number example: sogc2003103g (will continue to be accepted) sogc 20 03 103 g d02 historical pi n cou n t schematic resista n ce tolera n ce packagi n g model v alue code sogc 16 05 221 331 g r61 historical pi n cou n t schematic resista n ce resista n ce tolera n ce packagi n g model v alue 1 v alue 2 code new global part numbering: sogc1605131agrz (preferred part numbering format) sogc1605131agrz historical part number example: sogc1605221331g (will continue to be accepted) lead (p b )-free, lead (p b )-free, a v aila b le e1
document number: 31506 for technical ques tions contact: ff2ar esistors@vishay.com www.vishay.com revision: 30-sep-05 33 sogc 01, 03, 05 thick film resistor networks , small outline, molded dip vishay dale dimensions in inches [millimeters] 0.105 [2.67] 0.100 [2.54] 0.010 0.005 [0.254 0.127] 0.406 0.012 [10.31 0.305] 0.028 0.010 [0.711 0.254] typ. 0.008 [0.203] 0.295 [7.49] 0.045 [1.14] ref. pin 1 0.045 [1.14] a 0.050 [1.27] non-accum. typ. 0.018 [0.457] typ. b sogc 0.006 [0.152] max. typ. global model ab sogc16 0.440 [11.1 8 ] 0.350 [ 8 . 8 9] sogc20 0.540 [13.72] 0.450 [11.43] technical specifications parameter unit s0gc16 s0gc20 package power rating (max. at + 70c) w 1.6 2.0 tc tracking (- 55c to + 125c) ppm/c 50 voltage coefficient of resistance: ppm/v < 50 typical maximum operating voltage: vdc 50 operating temperature range: c - 55 to + 125. storage temperature range: c - 55 to + 150 mechanical specifications marking: model number, schematic number, valu e tolerance, pin 1 indicator, date code. marking resistance to solvents: permanency testing per mil-std-202, method 215. maximum solder reflow temperature: + 255c solderability: per mil-std-202, method 20 8 e. terminals: copper alloy. solder dipped terminal body: molded epoxy.
www.vishay.com for technical questions contact: ff2aresistors@vishay.com document number: 31506 34 revision: 30-sep-05 sogc 01, 03, 05 vishay dale thick film resistor networks, small outline, molded dip impedance codes code r 1 ( ? )r 2 ( ? )coder 1 ( ? )r 2 ( ? ) 500b 8 2 130 141a 270 270 750b 120 200 1 8 1a 330 390 8 00c 130 210 191a 330 470 990a 160 260 221b 330 6 8 0 101c 1 8 02402 8 1b 560 560 111c 1 8 02703 8 1b 560 1.2k 121b 1 8 0 390 501c 620 2.7k 121c 220 270 102a 1.5k 3.3k 131a 220 330 202b 3k 6.2k circuit applications 01 schematic 15 or 19 resistors with one pin common the sogcxx01 circuit provides a choice of 15 or 19 nominally equal resistors, each connected between a common lead (16 or 20) and a discrete pc board pin. commonly used in the following applications: mos/rom pull-up/pull-down ttl input pull-down open collector pull-up digital pulse squaring "wired or" pull-up ttl unused gate pull-up power driven pull-up high speed parallels pull-up 03 schematic 8 or 10 isolated resistors the sogcxx03 circuit provides a choice of 8 or 10 nominally equal resistors with each resistor isolated from all others and wired dire ctly across. commonly used in the following applications: "wired or" pull-up long-line impedance balancing power driven pull-up led current limiting powergate pull-up ecl output pull-down line termination ttl input pull-down 05 schematic ttl dual-line terminator; pulse squaring, 14 or 1 8 pairs of resistors (r 1 resistors are common to leads 16 or 20) (r 2 resistors are common to leads 8 or 10) the sogcxx05 circuit contains 14 or 1 8 pairs of resistors. each pair is connected between ground and a common line. the junctions of thes e resistor pairs are connected to the input leads. the 05 circuits are designed for ttl dual -line termination and pulse squaring. sogc16 sogc20 pin 1 sogc16 sogc20 pin 1 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r1 r1 r1 r1 r1 r1 r1 r2 r2 r2 r2 r2 r2 r2 r2 sogc16, sogc20 pin 1
document number: 31506 for technical ques tions contact: ff2ar esistors@vishay.com www.vishay.com revision: 30-sep-05 35 sogc 01, 03, 05 thick film resistor networks , small outline, molded dip vishay dale performance test max. ? r (typical test lots) power conditioning 0.50 % ? r thermal shock 0.50 % ? r short time overload 0.25 % ? r low temperature operation 0.25 % ? r moisture resistance 0.50 % ? r resistance to soldering heat 0.25 % ? r shock 0.25 % ? r vibration 0.25 % ? r load life 0.50 % ? r terminal strength 0.25 % ? r insulation resistance 10,000 megohm (minimum) dielectric withstanding voltage no evidence of arcing or damage (200 v rms for 1 minute) ambient temperature c 2.0 1.6 1.0 0.19 0.10 sin g le resistor sogcxx03 sogcxx01 & 05 sogc2001, 03, 05 pk g . sogc1601, 03, 05 pk g . deratin g power ratin g (watts) - 50 0 + 25 + 70 + 125 + 150
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
